Filter
Top Products
SUFF/UFF FILTRATION SYSTEMS
CHAPTER 3: INSTALLATION AND OPERATION
3-7
3.2.2 Assembling the Filter (cont.)
4. Sprinkle 8 ounces of filter powder on the
filter sheet. Ensure the powder covers the
filter paper evenly.
5. Place the crumb screen in the filter pan.
Allow the crumb screen to rest on the top
edges of the hold-down ring.
6. Place filter pan cover onto the filter pan
assembly. Ensure the cover is correctly
positioned over the slip fitting.
NOTE: Previous production units had two
covers (front and back). If this is the case,
place both covers on the filter pan and ensure
that the front cover is correctly positioned
over the slip fitting.
Sprinkle the proper amount of filter powder evenly
over the paper.
Crumb screen properly placed.
Fully assembled pan with proper placement of lid
over slip fitting (slip-fitting orientation may vary
according to fryer system).