Frymaster BIPH14 Fryer User Manual


 
1-1
BIPH14 / MPH14 SERIES ELECTRIC FRYER
CHAPTER 1: INTRODUCTION
1.1 General
Read the instructions in this manual thoroughly before attempting to operate this equipment. This
manual covers all configurations of McDonald’s PH14 models. The fryers in this model family have
most parts in common, and when discussed as a group, will be referred to as “PH14” fryers.
Although similar in appearance to the BIH14 McDonald’s electric fryers, the BIPH14 fryers feature
a significantly different built-in filtration system. The new Euro-Look incorporates rounded topcaps
and large round drains, which ensures that fries and other debris will be washed into the filter pan.
Other features, including the deep cold-zones and easy to clean, open frypots remain essentially
unchanged. Other features, including the deep cold-zones and open frypots with tilt-up elements
remain essentially unchanged. The PH14 fryers are controlled with the M2000 computer. Fryers in
this series come in full- or split-vat arrangements, and can be purchased as single units or in batteries
of up to five fryers.
1.2 Safety Information
Before attempting to operate your unit, read the instructions in this manual thoroughly.
Throughout this manual, you will find notations enclosed in double-bordered boxes similar to the
one below.
DANGER
Hot cooking oil causes severe burns. Never attempt to move a fryer containing hot
cooking oil or to transfer hot cooking oil from one container to another.
CAUTION boxes contain information about actions or conditions that may cause or result in a
malfunction of your system.
WARNING boxes contain information about actions or conditions that may cause or result in
damage to your system, and which may cause your system to malfunction.
DANGER boxes contain information about actions or conditions that may cause or result in
injury to personnel, and which may cause damage to your system and/or cause your system to
malfunction.
Fryers in this series are equipped with the following automatic safety features:
1. Two high-temperature detection features shut off power to the elements should the temperature
controls fail.
2. A safety switch built into the drain valve prevents the elements from heating with the drain valve
even partially open.