Filter
Top Products
3-1
FBR18 & FBRA18 SERIES GAS RETHERMALIZERS
CHAPTER 3: OPERATING INSTRUCTIONS
3.1 Introduction
Mechanically, the FBR18 and FBRA18 rethermalizers are virtually identical, the only difference
being that the FBRA18 units have an automatic filling (AutoFill) feature. Both units use the same
digital temperature controller and mechanical timers.
In operation, a setpoint is programmed into the controller which then regulates burner firing to
maintain the water in the cookpot at the desired temperature. Six individual color-coded mechani-
cal timers allow different types or quantities of product to be rethermalized simultaneously. The
timers are equipped with an alarm to notify the operator that rethermalizing is complete. The prod-
uct baskets have color-coded handles that correspond to the timers to eliminate confusion.
3.2 FBR18/FBRA18 Digital Controller
Heating
Mode
Indicator
Setpoint
Adjustment
Arrows
Temperature
or Setpoint
Display Switch
Melt
Cycle
Switch
Digital
Display
Power
Switch
Celsius or
Fahrenheit
Display Switch
Frymaster
9 . 9 9 9
C
OPERATING THE FBR18/FBRA18 DIGITAL CONTROLLER
WARNING
Ensure the cookpot is filled with water before turning the controller on. “Dry firing”
will cause damage to the cookpot!
1. Turn the controller on by pressing the Power
switch. The controller software version num-
ber will display for 4 seconds in the digital display then change to the last programmed setpoint
temperature.