Filter
Top Products
4-7
4.5 Unit Operation (cont.)
8. With oil return nozzle in the vessel, turn
filter switch “ON” to begin pumping
clean oil into the fryer. Allow the oil to
recycle through the fryer for a few
seconds to wash out sediment on the
bottom of the cooking vessel before
closing the drain valve.
9. Close the drain valve handle. It takes
approximately 5 to 7 minutes for the filter
to pump all the oil back into the fryer.
10. Allow the pump to run for 10-15 seconds
after air starts to flow through the wand,
before shutting off the filter. Clearing
residual shortening/oil from the return
lines reduces the likelihood of clogged
lines.
CAUTION
Operating the fryer without oil in the fryer vessel will cause damage to the
fryer and the warranty will be voided.