Gaggenau EB 270/271 Microwave Oven User Manual


 
11
2.4 Special functions
Display of the current oven temperature
(Thermotest)
Core temperature sensor
Power failure safeguard
Holiday safeguard
Child lock
Auto pyrolysis (cleaning)
ECO plus mode
The current oven temperature is displayed for a few
seconds when you press the (Confirmation) key.
Note: when the oven is operated continuously,
temperature fluctuations of up to 5 °C, which are
inherent to the system, may occur.
Note: during the pyrolysis process, it is not
possible to display the current oven temperature.
You can measure the core temperature of your food
exactly using the core temperature sensor. You can
select and set the core temperature between 1 °C
and 99 °C.
When the oven is on and a power failure occurs,
the heating process is stopped when the power
returns after the failure.
Note: the appliance bridges a power failure lasting
5 minutes without any consequences.
Every oven heating process is cancelled after
12 hours if the oven has not been operated during
this time. This function is not active if the timer has
been programmed.
The child lock prevents inadvertent activation of the
oven.
In the cleaning mode, the oven is heated up to a
temperature of 485 °C. At this high temperature,
even the most stubborn of soiling is burnt away.
When you select the energy saving ECO plus mode
in the options menu, the light and catalytic converter
heating are switched off during the cooking
process in all the heating modes. If the timer has
been programmed, the oven also switches off the
heating element before expiry of the programmed
time to make use of the residual heat.