Filter
Top Products
EB 270
EB 290
Proceed as follows:
– When unpacking the appliance, check it for
transport damage.
– Please remove the transport protection under the
handle, and the adhesive tape which protects the
door during transportation.
– A flexible cable should be used as the mains
lead. The cross-section must be selected
according to the rated current consumption and
the type of connection.
– Push the appliance into the item of furnishing. Use
the included wood screw to firmly bolt it to the
face timber surface of the conversion cabinet on
the handle and hinge side, directly underneath
the bottom panel.
Note: Use a spirit level to check that the oven is
installed exactly horizontally.
– After installing, ensure that wires are protected
against contact.
– Check the oven functions correctly.
– Thoroughly clean the appliance and accessories
before using them for the first time.
(see ”Cleaning and care”)
40 5080007880 en 01.03 EB
585
560
min.
550
550
580
536
42
590
85
590
10
Fig. 56
585
660
min.
550
650
580
536
42
690
85
590
10
Fig. 57