Filter
Top Products
11.3 How to do it
The appliance must only be connected by an
authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.
The electrician is responsible for the correct
functioning of the appliance at the time of
installation. He should instruct the user on how to
operate the appliance correctly on the basis of the
Operating Instructions, and the user has to be
instructed on how to disconnect the appliance in an
emergency.
We accept no liability for damage caused by
failure to comply with these instructions.
If it is not possible to disconnect the appliance
from the mains via an easily accessible plug and
permanent cable connection, an isolating switch
with a contact clearance of at least 3 mm must be
fitted on the installation side.
Repairs carried out improperly may involve
substantial risks for you.
Connection to the power mains:
On the top of the appliance there is a cover that
has to be unscrewed. The wiring diagram stuck
onto the top of the appliance shows the connection
variant.
For 230 V only: the oven is connected in one
phase. (EB 270 – 1x16 A / EB 290 – 1x20 A)
For 400 V only: the oven is connected in two
phases, i.e. L1, L2 and N.
The appliance must be earthed.
The manufacturer cannot be held liable for
damages that might arise from improper or non-
existent earthing of the appliance.
Screw the cover back on.
39