Filter
Top Products
Programming a switch-off time
The appliance switches off automatically at a time
that you have chosen. The starting point is the time
of day set on the appliance.
Proceed as follows:
– Press the (Timer) key twice. The (End) and
(Cooking time) symbols flash.
– Press the + or – key to set the required time. You
can choose any switch-off time within a period of
24 hours.
– Press the (Confirmation) key to confirm the
entered value. An audible signal is sounded. The
(Cooking time) symbol lights up on the display.
After the set time has elapsed, the (Cooking
time) symbol flashes and an audible signal is
sounded.
By pressing any key, you can switch off the signal
and heating will start again. Turn the temperature
selector switch to 0 to end the operation.
Programming a cooking time and an off time
This mode enables you to start and end baking and
cooking in your absence.
Proceed as follows:
– Enter a required duration (see Page 16)
– Press the (Confirmation) key
– Enter the required switch-off time (see above)
– Press the (Confirmation) key
The automatic mode becomes active as soon as the
switch-off time is programmed and you have
pressed the (Confirmation) key.
17
Fig. 30
Note: the time of day that is set on the appliance
is the starting point for programming the switch-off
time.
You can query the entered value by pressing the
(Timer) key twice.
2x