Gaggenau EB 290/291 Microwave Oven User Manual


 
34
9.2 Auto pyrolysis (Self-cleaning )
Before you start auto pyrolytic cleaning:
Remove extreme soiling from the oven.
– Manually clean the door seals, the inside of the
door and the glass pane because the pyrolytic
cleaning process does not clean these parts.
Important!
Check that the oven door is firmly closed on the
oven.
Proceed as follows:
Switching On
Remove all loose interior parts (e.g. gridiron or
core temperature sensor) from the oven com-
partment. There must be no objects left in the
oven compartment!
– Close the oven door.
– Turn the “Temperature" and “Mode" control
knobs by one latching position to the left.
50
0
Caution!
Very high temperatures occur during the pyrolytic
self-cleaning process.
Observe the appropriate caution and keep
children away.
50
0
Fig. 49
Fig. 50
Fig. 51
Gaggenau baking trays and grilling trays are
coated with pyrolysis-proof enamel. To arrive at an
optimum cleaning result, you are nevertheless
advised to remove all accessories from the oven
before the pyrolytic cleaning process. Only this
will ensure optimum heat distribution.
If you would like to remove burnt-in residues
from your baking tray or your grilling tray, it is
imperative that you observe the following
safety notes:
– Remove extreme fatty soiling, roast juice and
food remainders before the pyrolytic cleaning
process. These can cause a fire risk!
– Only ever insert one baking tray or one grill tray
in the lowest shelf in the oven.
– Insert the baking tray or your grill tray fully.
– The gridiron, the rotary spit or the baking stone
must not be cleaned pyrolytically.