Gaggenau RB 492 Freezer User Manual


 
23
8. Fastening the fixing rib to the
furniture door
(refrigerator compartment)
Note:
The fixing ribs are pre-assembled for stainless steel
doors. In this case continue with the next installation step
(“C / 9. Fastening the adjusting rib to the furniture door
(freezer compartment)”).
1. Hang the furniture door on the threaded rod (a).
2. Adjust the furniture door using the threaded rod
(Torx screwdriver). Re-examine the dimensions of
the crack continuously. To do this, use the assembly
gauge (b).
3. Transfer the position of the fastening screws on the
outer edge of the appliance door to the furniture
door and mark.
4. Remove furniture door.
5. On both lengths of the furniture door, draw a parallel
with the help of the positioning aid.
6. Lengthen the markings to the parallels using an
angle of contact.
7. Apply the fixing ribs (b) and mark out the holes.
8. Pre-drill the holes.
9. Screw on the fixing ribs (b).
10. Hang the furniture door on the threaded rods.