Filter
Top Products
• 30 •• 30 •
ADJUSTMENTS
The machine that you have bought allows
for certain adjustments that will permit
you to use it to its full potential.
Gaggia Adapting System
Coffee is a natural product and its cha-
racteristics may change according to its
origin, blend and roast. The Gaggia co ee
machine is equipped with a self-adjusting
system that allows the use of all types of
co ee beans available on the market (non
caramelized).
• The machine automatically adjusts
itself in order to optimise the extrac-
tion of the coffee, ensuring perfect
compression of the tablet to obtain a
creamy espresso co ee that will release
all the aromas, regardless of the type of
co ee used.
• The optimisation process is a learning
process that requires the brewing of a
certain number of co ees to allow the
machine to adjust the compactness of
the ground co ee.
• Attention should be given to spe-
cial blends, which require grinder
adjustments in order to optimise the
extraction of the co ee (see the “Co ee
Grinder Adjustment” section).
Coff ee Grinder Adjustment
Warning! The grinder
adjustment knob, inside the
co ee bean hopper, must be turned
only when the grinder is working. Do
not pour ground and/or instant co ee
into the co ee bean hopper.
Do not insert any material
other than co ee beans into
the hopper. The grinder contains
moving parts that may be dangerous.
Therefore, do not insert ngers and/
or other objects. The grind setting
may only be adjusted using the knob.
Turn o the machine and unplug it
from the socket before carrying out
any type of operation inside the
coffee bean hopper. Do not pour
co ee beans when the co ee grinder
is working.
“INTENZA” water fi lter.
To improve the quality of the used water,
it is advisable to install the water lter.
Remove the water filter from its packa-
ging, immerse it vertically (with the ope-
ning positioned upwards) in cold water
and delicately press the sides so as to let
the air bubbles out.
Remove the small white filter from the
tank and store it in a dry place sheltered
from dust.
Set the Intenza Aroma System as speci ed
on the box.
A = Soft water
B = Medium water (standard)
C = Hard water
Put the water lter into the empty tank.
Press it until its limit stop.
Fill the tank with fresh drinking water and
reinsert it into the machine.
Dispense the water in the tank by using
the hot water function (see the “Hot wa-
ter dispensing” section).
Fill the water tank again. The machine is
now ready to be used.
Note: If there is no Intenza
water lter, insert the small
white lter previously removed into
the water tank.