Filter
Top Products
• 38 •• 38 •
9 When the water in the tank is nished,
the icon on the side is displayed to
indicate that the selector switch must
be brought back to the “
” position.
Steady on
10 Rinse the water tank thoroughly and
re ll it with fresh drinking water.
11 Empty the container used to collect the
liquid dispensed by the machine.
13 Before starting the procedure, check
that the following icons are displayed.
Steady on
Steady on
12 Place a large container under the
dispensing spout.
14 Select the pre-ground co ee function
by pressing the “
“ button one or
more times.
Do not add the pre-ground
co ee to the compartment.
The icon will appear on the display.
15 Press the button to brew a long cof-
fee.
16 Wait until brewing is completed and
empty the container with water.
17 Repeat the operations from step 12 to
step 16 for 3 times; then continue with
step 18.
18 Place a container under the steam wand
(Pannarello, if supplied).
19 Turn the selector switch clockwise to set
it to the “
” position.
Steady on
Steady on
The following icon will be displayed.
20 Dispense water until the no water si-
gnal is displayed, then turn the selec-
tor switch counter-clockwise to set it
to the “
” position.
21 At the end, ll the water tank again.
The descaling cycle is complete. Then,
the products can be brewed.