Filter
Top Products
ENGLISHENGLISH
• 33 •• 32 •
12.1 Programming water hardness
Running water is more or less hard, depending
on the area. This coffee maker can be adjusted
so that it will work optimally with the water
hardness level, expressed on a scale from 1 to
4, of your area.
The appliance is already set to an average value
(hardness3).
Before proceeding, you must check
the water hardness of your area
using the strip supplied with the appliance.
Quickly immerse (1 second) the strip into
the water and shake slightly. After a minu-
te, the strip shows the test results.
To programme this function, proceed as follows:
• Press the button (22); the number of lit buttons
indicates the programmed water hardness;
• If you desire to change the water hardness
level, press the button (22) repeatedly up to
when the correct number of lit buttons are
displayed, indicating the water hardness level.
Hardness 1 = buttons (22) and (23) lit
Hardness 2 = buttons (22), (23) and (24) lit
Hardness 3 = buttons (22), (23), (24) and (25) lit
Hardness 4 = buttons (22), (23), (24), (25) and (26) lit
The hardness index matches the 1-4 squares on
the strip.
12.2 Programming the rinsing cycle
Immediately after switching ON, the machine
automatically eliminates any remaining water in
the piping circuit to guarantee that the coffee is
made with fresh water only.
To programme this function, proceed as
follows:
• Press the button (23); when the function is ON,
the warning light (27) lights up.
12.3 Programming “Prebrewing”
The prebrewing process slightly dampens the
coffee before brewing; this brings out the full
aroma of the coffee and gives it an excellent
taste.
To programme this function, proceed as
follows:
• Press the button (24); when the function is ON,
the warning light (28) lights up.
Note: the manufacturer has already
activated this function.
12.4 Programming “Pregrinding”
The pregrinding procedure makes the machine
grind twice: the first time, for the type of selected
coffee and, the second, for the next type of
coffee (not yet selected). This function is only
useful if you must prepare different types of
coffee at the same time (for example, during a
visit, party).
To programme this function, proceed as
follows:
• Press the button (25); when the function is ON,
the warning light (29) lights up.
13 LEGAL INFORMATION
• This instruction book contains the necessary
information to use and upkeep your appliance
correctly.
• The information should be viewed as a
guideline to use and upkeep your coffee
maker in safety. The information is not
exhaustive. For additional information or for
information on topics not covered or
inadequately covered in this book, please
contact the authorized service centres or the
manufacturer directly.
• In addition, we should mention that these
instructions are not a part of a previous or
existing agreement, legal contract or similar
and that the information is not changed by
any other document.
• All the manufacturer’s obligations and
liabilities are based on the relative sale
contract that also specifies all warrantee terms
and conditions.
• The contractual warrantee terms and
conditions are not limited or extended based
on this instruction book.
• This instruction book contains information
protected by copyright.
• This instruction book cannot be
photocopied or translated into other
languages without the explicit written
consent of the manufacturer.
14 SCRAPPING
• Make unusable any appliances not in use.
• Detach the plug from the wall outlet and cut
the electric cord.
• Deliver broken appliances to a suitable
collection centre.
Gaggia-Syncrony-cod 165892000 rev.01.PMD 14/06/2002, 17.2532-33