Stovax Electric Stove Range Range User Manual


  Open as PDF
of 15
 
5
2.6 THERMAL SAFETY CUTOUT
The appliance is fitted with a thermal safety cutout, which
operates if it overheats. If this occurs you notice the
heater is cold. If this happens:
• Unplugandallowtheheatertocoolfor5-10minutes
• Checktheairinlets/outletsforanyobstructionandclear,
see Maintenance
• Plugin,switchonthefireandthecutoutnowre-sets
The appliance should function correctly again but if this is not
the case:
• Unplugoncemoreandhavethefirecheckedbya
competent electrician
Please note that the safety cutout will activate when the
fan heater is turned off. If the fan heater is turned back on
immediately, you must wait 15 seconds before the heater
warms the air.
• Removetheloosefuelsfromtheglassfibrefuelbed
3. MAINTENANCE
ALWAYS UNPLUG FROM MAINS SUPPLY BEFORE
CLEANING OR UNDERTAKING ANY MAINTENANCE
REPLACING LAMPS
3.1 If the lamp bulb fails to light you will notice an uneven or
unlit fuel effect and you can change the lamp:
• Switchofftheapplianceandisolateitfromthemainsby
unplugging the unit
• Wait for at least 10 minutes until the appliance has
cooled down
• Unscrewthebulbs
Only use fused 40W Elegance Soft E.S. (E14) candle lamps
available from Gazco dealers and most electrical shops
3.2 To remove the door, glass front and fuel bed and access the
lamps, choose the instruction corresponding to your model
from Section 4 below.
3
AR2160
USER INSTRUCTIONS
3.3 CLEANING
Only clean the outer casing when it is cold. Do not use
abrasive cleaners.
For painted castings, wipe with a damp cloth and buff with a
lint free duster.
3.4 CLEANING AIR INLETS
• Ensuretheapplianceisunplugged
• Cleantheairinletandoutletgrillsregularlywithasoft
cloth or the nozzle of a vacuum cleaner
Dust build-up can inhibit efficient performance of the fan
and lead to the safety cut-out operating:
• Keeptheareaaroundthestovecleanandfreeoffluff,
dust or pet hair
• Inparticular,build-upofdustetc.canoccuraroundthe
heater area under the stove. Take particular care to keep this
area free from such particles on a regular basis to prevent
build-up.
3.5 CLEANING LOG MOULDING
• Makesuretheapplianceisunplugged
• Takethelogmouldingouttocleanawayfromthe
appliance. Follow Section 4 below to access log
moulding
• Dustoffanybuild-upwithabrushordampcloth-
replace
 previous next