Stovax RV40 Range User Manual


  Open as PDF
of 38
 
25
7.2 Replace the bricks in the reverse order from removal.
8. FITTING THE FRAME (RIVA)
(3 sided ‘Profil’ frame shown)
(Tools required – 2.5mm A/F Hex socket key)
8.1 The frame is in 2 parts, the lower frame and the main 3
sided section.
To fit the frame:
•Locatethemainframeonthetopclipsonthefirebox,
See diagram 16
Top clip (3 places)
Rotate backwards to fit
PR7011
16
•Rotatethemainframeintopositiononthefrontofthe
appliance body
•Fixinplacewiththetrimfixingscrews
•Fixthelowerframeintopositionusingthetwofixing
screws supplied, See diagram 17
Lower frame not required on
4-sided frames
Main frame fixing
(1 screw each side)
Lower frame fixing
(1 screw each side)
17
7. BRICK REMOVAL (ALL)
(Tools required – None)
7.1 The bricks must be removed and replaced in the correct
order, as shown in diagram 13/14/15, after removing the
baffles and grate system.
13
Riva 40
14
Riva 55
15
Riva 76 as per above, but brick number 7 is made up of 2 parts.
Riva 66
Riva 66 Avanti
INSTALLATION INSTRUCTIONS
 previous next