Stovax RV55 Range User Manual


 
25
7.2 Replace the bricks in the reverse order from removal.
8. FITTING THE FRAME (RIVA)
(3 sided ‘Profil’ frame shown)
(Tools required – 2.5mm A/F Hex socket key)
8.1 The frame is in 2 parts, the lower frame and the main 3
sided section.
To fit the frame:
•Locatethemainframeonthetopclipsonthefirebox,
See diagram 16
Top clip (3 places)
Rotate backwards to fit
PR7011
16
•Rotatethemainframeintopositiononthefrontofthe
appliance body
•Fixinplacewiththetrimfixingscrews
•Fixthelowerframeintopositionusingthetwofixing
screws supplied, See diagram 17
Lower frame not required on
4-sided frames
Main frame fixing
(1 screw each side)
Lower frame fixing
(1 screw each side)
17
7. BRICK REMOVAL (ALL)
(Tools required – None)
7.1 The bricks must be removed and replaced in the correct
order, as shown in diagram 13/14/15, after removing the
baffles and grate system.
13
Riva 40
14
Riva 55
15
Riva 76 as per above, but brick number 7 is made up of 2 parts.
Riva 66
Riva 66 Avanti
INSTALLATION INSTRUCTIONS