Filter
Top Products
17
MAINTENANCE and SERVICING
(Tool required - 5mm A/F Hex socket key)
1
0.1 To maintain the safe use of your Riva stove, you may need
to adjust the door hinges to ensure safe correct closing of
the door. Complete this operating as follows.
10.2 Open the door to give access to the fixed part of the door
hinge as shown.
10.3 Using a 5mm A/F hexagon head key loosen the fixing
screws, as shown, and reposition the hinge blocks to
achieve the correct fit. This may require a trial and error
approch to find the correct position.
10B. ADJUSTING DOOR HINGES
RIVA CUBE
PR7106
PR7107
Fixing Screw
5mm Hex Key
(Tool required - 4mm A/F Hex socket key)
10.1 To maintain the safe use of your Riva stove, you may need
t
o adjust the door hinges to ensure safe correct closing of
the door. Complete this operating as follows.
10.2 Open the door to give access to the fixed part of the door
hinge as shown.
10.3 To adjust the door alignment, loosen the 6 fixing screws
using a 4mm A/F hexagon head socket key. Turn screw A to
level the door. Turn screw B to raise or lower the door.
Re-tighten the fixing screws and check alignment. This may
require a trial and error approach to find the correct
position.
A
B
10A. ADJUSTING DOOR HINGES
RIVA AVANTI
PR7175