GE 106748 Waffle Iron User Manual


 
5
1. Make sure unit is unplugged. Select
preferred cooking grids.
2. Insert tabs on grid into slots on unit
near hinge area.
3. Press the other side of the grid
to snap into place. Repeat with
other grid.
4. Close unit and plug into outlet.
5. Let preheat until the green PREHEAT
Light comes on (about 5 minutes).
To Use
6. Cook the waffles or sandwiches
according to recipe. Carefully
remove cooked food.
7. If using the sandwich grids and there
is a build-up of grease, clean the grids
and any surfaces of excess grease
before continuing to cook. Follow the
instructions in “To Clean.”
8. When finished cooking, unplug
unit and let cool.
9. Follow instructions in “To Clean.”
WARNING: To reduce the risk of fire
or shock hazard, do not operate unit
unless grids are securely snapped
in place.
WARNING: To reduce the risk of fire
or electrical shock, do not grill meats,
fatty foods, or marinated products on
the sandwich griddle.
To Clean
NOTE: Before first use, wash and dry cooking grids.
Warning: To reduce risk of burns to
hands and fingers, allow unit to cool
before removing grids.
1. Make sure unit is unplugged and
grids have cooled.
2. Press GRID RELEASE Buttons to
remove the cooking grids. Wash in
hot, soapy water; rinse and dry. The
grids can also be washed in an
automatic dishwasher.
3. If grease drips over the grids into the
reflector pans,
the reflector
pans must also
be cleaned.
Using a soapy,
damp cloth,
carefully wipe
entire surface
of pan to
remove all grease. Let dry.
4. To clean the outside of the unit,
wipe with a damp cloth. Do not use
abrasive cleansers on the unit. Do not
place unit in automatic dishwasher or
immerse unit in water or other liquid.
5. The unit may be stored in an upright
position. Store removable grids so that
nonstick surfaces are not scratched.
DO NOT IMMERSE UNIT IN WATER OR
OTHER LIQUID.