GE 162D9617P008 Refrigerator User Manual


 
20
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Preparing to install the refrigerator.
Door Alignment
After leveling, make sure that doors are even at the top.
To make the doors even,
adjust the fresh food door. Using a 3/16 Allen wrench or a 5/16 socket wrench
(depending on model), turn the door adjusting screw to the right to raise the door, to the left to lower it. (A
nylon plug, imbedded in the threads of the pin, prevents the pin from turning unless a wrench is used.)
After one or two turns of the wrench, open and close the fresh food door and check the alignment at the top
of the doors.
Dimensions and Specifications
(for CustomStyle models)
Remove base grille by opening
the doors and pulling the grille
straight out.
3/16Allen Wrench
70
1
/
4
36
24
24Cabinet
24Side Panels
Water Electrical
3/4Airspace
(1/2Gap + 1/4
Wall Plates)
25
Counter Top
5/16Socket Wrench
Raise
Raise
or