Filter
Top Products
CAm
Am
CLEAN~G
Keep your oven clean
and
sweet-
Don’t use sharp-edged utensils
smelling. Opening the oven door a
on your oven. The inside and
few minutes after cooking helps air
outside oven walls can be scratched.
out the inside. An occasional
The control panel can be damaged.
thorough wiping with a solution of
baking soda and water keeps the
BE CERTAIN POWER IS OFF
BEFORE CLEANING ANY
inside fresh.
PART OF THIS OVEN.
How to Clean the Inside
Walls and floor. Some spatters can be removed with
Metal and plastic parts on door: Wipe frequently with
a paper towel, others may require a damp cloth.
a damp cloth to remove all soil. DO NOT USE
Remove greasy spatters with a sudsy cloth, then rinse
ABRASIVES, SUCH AS CLEANING POWDERS
with a damp cloth. Do not use abrasive cleaners on
OR STEEL AND PLASTIC PADS. THEY WILL
oven walls. NEVER USE A COMMERCIAL OVEN
MAR THE SURFACE.
CLEANER ON ANY PART OF YOUR
MICROWAVE OVEN.
Special note when using Brown ‘N Sear Dish: If
grease is present, high heat generated on bottom of a
Door (inside). Window: Wipe up spatters daily and
Brown ‘N Sear dish-may cause the grease to burn
wash when soiled with a damp cloth. Rinse
onto the oven tray. This may be removed with a
thoroughly and dry.
cleanser such as Bon
Ami(’)
brand cleanser.
After using Bon
Ami(’)
brand cleanser, rinse and dry
thoroughly, following instructions on can. Do not use
Bon
Ami(”)
brand cleanser on the painted surfaces such
as the walls. It may scratch the paint.
How to Clean the Oukide
Case. Clean the outside of your oven with soap and
damp cloth, rinse with a damp cloth and then dry.
Wipe the window
clean
with a damp
cloth.
Chrome
trim is best wiped with a damp cloth and then with a
dry towel.
Control Panel. Wipe with a damp cloth. Dry
thoroughly. Do not use cleaning sprays, large amounts
of soap and water, abrasives or sharp objects on the
panel—they can damage it.
Door Surface. When cleaning surfaces of door and
oven that come together on closing the door, use only
mild,
non-abrasive soaps or detergents applied with a
sponge or soft cloth.
Power Cord. If the cord becomes soiled, unplug and
wash with a damp cloth. For stubborn spots, sudsy
water may be used, but be certain to rinse with a
damp cloth and dry thoroughly before plugging cord
into outlet.
29