Filter
Top Products
OVEN CONTROL, CLOCK AND TIMER
(continued)
The control has a series of tones that will sound at different times. These
tones may sound while you set the control for an oven function or at the end
of the oven function. They will also alert you when an incorrect time
or temperature has been entered or if there is a problem with the oven.
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this to use
the Centigrade selections.
1. Press the upper oven BAKE
and BROIL HI/LO at the same
time for 2 seconds until the
display shows “SF.”
2. Press BROIL HI/LO. The display will
show “F” (Fahrenheit).
3. Press BROIL HI/LO again. The display
will show “C” (Centigrade).
4. Press START. The new setting will be
displayed for both ovens.
START
BROIL
HI=
LO=
+
-
BROIL
HI=
BAKE
LO=
+
-
Tones While Setting the Control Preheat Notification Tone
When you press a touch pad you will hear a beep.
This beep will let you know you have placed enough
pressure on the pad to activate it.
When you set an oven temperature the oven
automatically starts to heat. When the temperature
inside the oven reaches your set temperature a tone will
sound to let you know to place the food in the oven.
Attention Tone
This tone will sound if you set an invalid function or try to set an additional
function. The tone can be quickly identified by watching the display messages.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound
followed by one beep every 6 seconds, until
CLEAR/OFF is pressed. This continuous 6 second
beep may be canceled.
To cancel the 6 second beep:
1. Press the upper oven BAKE and
BROIL HI/LO at the same time
for 2 seconds until the display
shows “SF.”
2. Press TIMER ON/OFF. The display
shows “CON BEEP” (continuous beep).
Press TIMER ON/OFF again. The
display shows “BEEP.” (This cancels
the one beep every 6 seconds.)
3. Press START.
NOTE: This cancels the end of cycle tone
for both ovens.
START
TIMER
ON/OFF
BROIL
HI=
BAKE
LO=
+
-
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose
to use. The following are the features and how you may activate them. The
special feature modes can only be activated while the display is showing the
time of day clock.
They remain in the control’s memory until the steps are repeated. When the
display shows your choice press START. The special features will remain in
memory after a power failure.
8