Filter
Top Products
How to Set
Push the knob in and turn in either direction to the
setting you want.
At both
OFF
and
HI
the control
clicks
into position. You
may hear slight
clicking
sounds during cooking,
indicating the control is keeping the power level you set.
LO HI
MED
OFF
Be sure you turn the control knob to
OFF when you finish cooking.
Indicator Lights
A
HOT SURFACE
indicator light will glow when any
halogen/radiant element is turned on, and will remain
on until the surface is cool enough to touch.
A surface unit
ON
indicator light will glow when
any
surface unit is on.
NOTE: The surface unit ON indicator light may glow between the
surface control settings of LO and OFF, but there is no power to
the surface units.
O
V
E
N
L
IG
H
T
OFF
HILO
MED
OFF
HILO
MED
O
FF
H
I
LO
M
ED
O
FF
H
I
LO
M
ED
S
U
R
F
A
C
E
L
IG
H
T
FRONT
REAR
REAR
FRONT
HOT SURFACE
OVEN TEMP
Using the surface units.
13
Troubleshooting TipsInstallation Instructions
GE Customer Service
Operating InstructionsSafety Information
About the radiant surface units…
The radiant cooktop features heating units beneath a
smooth glass surface.
NOTE: A slight odor is normal when a new cooktop is used for the
first time. It is caused by the heating of new parts and insulating
materials and will disappear in a short time.
The surface unit will cycle on and off to maintain
your selected control setting.
It is safe to place hot cookware from the oven or
surface on the glass surface when the surface is cool.
Even after the surface units are turned off, the glass
cooktop retains enough heat to continue cooking.
To avoid over-cooking, remove pans from the surface
units when the food is cooked. Avoid placing
anything on the surface unit until it has cooled
completely.
■
Water stains (mineral deposits) are removable using the cleaning
cream or full strength white vinegar.
■
Use of window cleaner may leave an iridescent film on the
cooktop. The cleaning cream will remove this discoloration.
■
Don’t store heavy items above the cooktop. If they drop onto the
cooktop, they can cause damage.
■
Do not use the surface as a cutting board.
SURFACE
COOKING
Never cook directly on the glass.
Always use cookware.
OFF CENTER
Always place the pan in the center of
the surface unit you are cooking on.