Filter
Top Products
Before you call for service…
58
Troubleshooting Tips
Operating Instructions
Installation Instructions
Safety Information
Troubleshooting TipsCustomer Service
Problem Possible Causes What To Do
LOCK light is on
The oven door was • Press the
CLEAR/OFF
pad.
when you want
accidentally locked. Allow the oven to cool.
to cook
Never force the door
latch handle.
“F—and a number”
You have a function • If a function error code
flash in the display
error code. appears during the self-
cleaning cycle, check the
oven door latch. The latch
may have been moved, even
if only slightly, from the
locked position. Make sure
the latch is moved to the
right as far as it will go.
Press the
CLEAR/OFF
pad.
Allow the oven to cool for
one hour. Put the oven
back into operation.
• Disconnect all power to
the range for 5 minutes
and then reconnect power.
If the function error code
repeats, call for service.
Power outage
Power outage or surge. • Reset the clock. If the
oven was in use, you must
reset it by pressing the
CLEAR/OFF
pad, setting the
clock and resetting any
cooking function.