Filter
Top Products
Cooktop Surface Light
When changing a cooktop light, do not touch the metal at the ends
of the light.
The cooktop light is easily replaced with a fluorescent
tube of the same wattage. Before changing the light,
pull the plug to the range or disconnect the power at the
main fuse or circuit breaker panel.
To remove:
Lift the light cover by pulling the bottom edge
toward you and then up.
Place fingers on top near each end of the light.
Roll the top of the light gently toward the front of
the range and gently pull the light from the socket,
making sure it does not hit the light cover.
To replace:
Place fingers on the top near each end of the light.
Press the light into the slots until it snaps into place.
Move light cover down and snap into place.
3
2
1
3
2
1
Care and cleaning of the range.
38
Operating Instructions
Installation Instructions
Safety InformationTroubleshooting TipsCustomer Service