Filter
Top Products
21
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
How to Delay the Start of Cleaning
(on some models)
Latch the door.
Turn the Oven Temperature knob to
CLEAN.
Press the
START TIME ON/OFF
pad.
Press the
HOUR
and
MIN.
pads to set the time
cleaning will start.
When the
CLEAN
light flashes, slide the latch
handle to the left as far as it will go and turn the
Oven Temperature knob to
OFF
.
4
3
2
1
You may notice some white ash in the oven. Wipe it up with a damp
cloth after the oven cools.
If white spots remain, remove them with a soap-filled steel wool pad and rinse
thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by
the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■ You cannot set the oven for cooking until the oven is cool enough
for the door to be unlatched.
■ While the oven is self-cleaning, you can press the
CLOCK
pad to
display the time of day. To return to the clean countdown, press
the
COOK TIME ON/OFF
pad.
■ If the shelves become hard to slide, wipe the shelf supports
with cooking oil.
After a Clean Cycle