Filter
Top Products
Before you call for service…
Troubleshooting TipsInstallation Instructions Customer ServiceOperating InstructionsSafety Information
Troubleshooting Tips
Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Problem Possible Causes What To Do
Surface units
The surface units are • With the controls off, check
not functioning
not plugged in solidly. to make sure the surface
properly
unit is plugged completely
into the receptacle.
The surface •Check to see the correct
unit controls control is set for the surface
improperly set. unit you are using.
The drip pans are • With the controls off, check
not set securely in to make sure the drip pan is
the cooktop. in the recess in the cooktop
and that the opening in the
pan lines up with the
receptacle.
The display goes
Power surge. • Disconnect power at the
blank or indicator
fuse box or circuit breaker
lights come on
for at least 10 seconds.
when range is
Turn power on and power
not in use
up your range. If the
indicator lights are still on,
call for service.
Oven light does
Light bulb is loose • Tighten or replace
not work
or defective. the bulb.
Switch operating light •Call for service.
is broken.
Oven will
Plug on range is not •Make sure electrical plug is
not work
completely inserted in plugged into a live, properly
the electrical outlet. grounded outlet.
A fuse in your home •Replace fuse or reset
may be blown or the circuit breaker.
circuit breaker tripped.
Oven controls • See the
Using the
improperly set.
oven
section.
Door left in the •If necessary, allow the
locked position. oven to cool then unlock
the door.
37