GE 25 Refrigerator User Manual


 
DIMENSIONS AND SPECIFICATIONS
(for 23‘ CustomStyle
models)
DIMENSIONS AND SPECIFICATIONS
28
Installation Instructions
INSTALLING THE REFRIGERATOR
REFRIGERATOR LOCATION
Do not install the refrigerator where
the temperature will go below 60°F (16°C)
because it will not run often enough to maintain
proper temperatures.
Do not install the refrigerator where
the temperature will go above 100°F (37°C)
because it will not perform properly.
Install it on a floor strong enough to support it
fully loaded.
CLEARANCES
Allow the following clearances for ease
of installation, proper air circulation and plumbing
and electrical connections:
23‘ (33” wide),
23‘/25‘ CustomStyle
25‘, 26‘
Sides 1/8(4 mm) 1/8(4 mm)
Top 1(25 mm) 1(25 mm)
Back 1/2(13 mm) 1(25 mm)
70
1
4 (178.4 cm)
36
(91.4 cm)
24(61 cm)
24 (61 cm)
Cabinet
Water
Electrical
3/4 (19 mm)
Airspace
(1/2 [13 mm] Gap +
1/4 [6 mm] Wall
Plates)
25 (63.5 cm)
Countertop
DIMENSIONS AND SPECIFICATIONS
(for 25‘ CustomStyle
models)
*72
1
/4(183.5 cm) required for full adjustment
of mobility wheels. If cabinets installed above
refrigerator have doors that are flush to the top of
the opening for the refrigerator, then an additional
1/8may be required to provide clearance for
cabinet doors to open freely.
36
(91.4 cm)
24(61 cm)
72
1
4
(183.5 cm)*