Filter
Top Products
7
Empty the pan. Place the Chill/Thaw
tray in the pan with the metal plate
facing down to chill and store items, or
with the metal plate facing up to thaw
items. Place the items on the tray and
close the pan completely.
Select the ExpressThaw
™
,
ExpressChill
™
or SelectTemp
™
pad. The display and SET light will
come on. Tap the pad until the light
appears next to the desired setting.
Use the chart to determine the best
setting to use.
■ To stop a feature before it is finished,
tap that feature’s pad until no options
are selected and the display is off.
■ During ExpressThaw and ExpressChill,
the display on the controls will count
down the time in the cycle.
■ After the ExpressThaw cycle is
complete, the pan will reset to the
MEAT setting (–1°C) to help preserve
thawed items until they are used.
■ The displayed actual temperature of
the CustomCool pan may vary slightly
from the SET temperature based on
usage and operating environment.
NOTE: For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw.This will help contain meat juices
and improve thawing performance.
About CustomCool .
™
(on some models)
The CustomCool
™
feature is a system of
dampers, a fan, a temperature thermistor
and a heater. Depending on the function
selected, a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature.
The pan is tightly sealed to prevent
the pan’s temperature from causing
temperature fluctuations in the rest
of the refrigerator.
The controls for this pan are located
at the top of the refrigerator with the
temperature controls.
How to Use
How it Works
ExpressThaw
™
ExpressChill
™