Filter
Top Products
8
Consumer Support Troubleshooting Tips Care and Cleaning
Operating
Instructions
Safety Instructions
To turn on a single surface unit:
Touch the ON/OFF pad; then touch
the (+)/(–) pad.
Use the (+)/(–) pad to choose
the desired power setting.
To use the Melt feature:
Touch the ON/OFF pad; then touch
MELT. The element will automatically set
to a predetermined setting and “L” will
be displayed.
To turn off a single surface unit, touch
the ON/OFF pad again.
To use the Simmer feature:
Touch the ON/OFF pad; then touch
SIMMER. The element will automatically
set to a predetermined setting and “3”
will be displayed. Adjust using the (+)/(–)
pad to increase or decrease the simmer
rate.
Single Surface Unit—Cook Settings
Surface Unit Cook Settings
The cooktop offers 19 power levels. Power
levels range from “L” to HI in precise half-
step increments. For example: 1, 1-1/2, 2,
2
-1/2 and up to HI.
Power Level “L”, the lowest setting, is
recommended for “Keep Warm.”
The power level increases one-half level
with each touch.
NOTE: When changing from a high heat
setting to a lower heat setting, the surface
unit may stop glowing. This is normal.
T
he unit is still on and hot.
NOTE: This cooktop has a rapid heat-up
feature. If the cooktop is cool when turned
on, it will glow red for a short period of time
until the desired power setting is reached.
Using the surface units—Touch pad-controlled models.
The power level with a fraction indicates
the additional half-step setting. You
may hear clicking sounds indicating
the control is maintaining your desired
setting.
Multi-Ring Burner (can be dual or triple, depending on model)
Touch the ON/OFF pad for the
right-front surface unit.
Use the (+)/(–) pad to set the desired
power setting.
Touch the BURNER SIZE pad as
needed to select the desired burner
size.
The light next to the BURNER SIZE pad
indicates which size the surface unit is on.
To turn the surface unit off, touch
the ON/OFF pad.
See page 10 for additional information.