Filter
Top Products
Cootiq
by~me
Time Cook I &II allows
vou
to
.
.
.
.–
.
.
@
microwave
Ior
a preset amount
or
time using automatic power level
10 (High), or change power level
automatically.
Power level 10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See the Cooking Guide.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1:
Fill a cup
2/3
full of
water, add 1 teaspoon of instant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave-safe (refer to
Microwaving Tips on page 3).
Place cup in oven and close door.
Step 2:
Touch TIME COOK I & II.
Display shows “
: O“ and “POWER
lo:’
“E~ER
COOK
~E
I“ flashes.
Step 3:
Select your cooking time.
Touch 1, 0 and O for a cooking time
of one minute. Display shows
“1:00”
and “POWER
10~’
“COOK
TIME I“ flashes.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see “How to
Change Power Level” at right.)
Step
4: Touch START. “COOK
TIME
IX’
“POWER 10” and time,
counting down, show on display.
Step 5:
When time
is up, the oven
signals and flashes
“End~’
Oven,
light and fan shut off.
Step
6: Open the door.
Using the
~me
CookII
Feature
The Time Cook II feature lets you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here’s how to do it.
Step 1:
Place food in oven in
microwave-safe container and close
the door.
Step 2:
Touch TIME COOK I & II.
Display shows “:
O“ and “POWER
10:’
“E~R
COOK
TME
I“
flashm.
Step 3:
Select your cooking time.
For example, touch 2, 1 and 5 for a
cooking time of two minutes and 15
seconds. Display shows
“2:15”
and
“POWER
10:’
“COOKTIME I“
flashes.
Step 4: Touch TIME COOK I & II.
Step
5: Set your cooking time.
How
to
Chmge
Power
hvel
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step
6: Touch the START pad.
10
Step
7: “POWER 10” is displayed
and “COOK TIME I“ counts down.
Step 8:
At the end of “COOK
TIME
1:’
the second power level is
displayed and “COOK TIME II”
is shown counting down.
Step 9:
When time is up, the oven
signals and flashes
“End~’
The
oven, light and fan shut off.
Step 10:
Open the door.
How to Use Auto
Stati
The Auto
Stirt
feature allows you
to program your oven to begin
cooking at a preset time of
day—
up to a
~-hour
delay.
To Use Auto Start
Step 1:
Touch
AU~
START pad
(instead of START pad).
Step 2:
Enter the time you want
the oven to start. (Be sure your
microwave oven clock shows the
correct time of day. )
Step 3:
Enter
your desired cooking
program.
Step
4: Touch START pad. The
oven will automatically start at the
desired time.