Filter
Top Products
39
To replace the bulb(s), first discon-
nect the power at the main fuse or
circuit breaker panel or pull the
plug.
Remove the screw at the front of
the light cover and lower the cover.
Be sure the bulb(s) to be replaced
are cool before removing. After
breaking the adhesive seal, remove
the bulb by gently turning.
Replace with 40-watt tubular bulbs.
Order WB36X936 from your GE
supplier. Tubular 40-watt bulbs
(40T6
1
/
2
/2), available in supermar-
kets and hardware stores, may also
be used for replacements.
Replace the screw. Connect electri-
cal power to the oven.
Cooktop Light/
Night Light
REMOVE SCREWS
To replace the oven light, first dis-
connect the power at the main fuse
or circuit breaker panel or pull the
plug.
Remove the top grille by taking out
the 2 screws that hold it in place.
Next, remove the two screws locat-
ed above the door near the center
of the oven that secure the light
housing.
Replace the burned-out bulb
with a 30-watt incandescent bulb
(WB02X4235), available from your
GE supplier.
Oven Light
Light Bulb Replacement