Filter
Top Products
5
Power Surge
Press and hold down the button for
additional power
at any speed.
NOTE: Never use
Power Surge
for more than
two minutes at
a time or motor
may overheat.
Power
Surge
1. Always make sure mixer is unplugged
and speed control is set to 0 (OFF).
2. Insert a beater into an opening on
the bottom
of the mixer.
Push until it
clicks into
place. Repeat
with other
beater.
1. Always make sure mixer is unplugged
and speed control is set to 0 (OFF).
Insert beaters.
2. Plug mixer into electrical outlet.
Place beaters into bowl.
3. Move the speed control to desired
speed, starting at 1 and increasing to
a higher speed as necessary.
4. When finished mixing, move speed
control to 0 (OFF) and unplug mixer.
5. To eject beaters, with speed control
set at 0 (OFF) push straight down on
the speed control.
6. To remove mixer from stand, hold
mixer and press mixer release button.
Pull mixer to release from stand.
To Mix
Optional Features (available on selected models)
1. Always make sure mixer is unplugged
and speed control is set to 0 (OFF).
2. Insert dough hook with collar into
the opening
indicated by
the illustration
on the mixer.
3. Align tabs on the dough hook with
the slots in the
opening. Push
until it clicks
into place.
Repeat with
the other
dough hook.
Mixer Lockdown Tabs
Use this feature to lock the mixer in
the “down” position when using on
the stand. Squeeze the tabs together to
lift the mixer head.
Bowl Control Lever
Use the lever to move the turntable. This
allows you to position the beaters near
the edge of the bowl or in the center of
the bowl.
To Insert Dough Hooks
To Insert Beaters
Collar
Tabs
Slot
840107300 ENv02 11/25/02 11:05 AM Page 5