Filter
Top Products
5
1. Make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters.
2. Plug mixer into electrical outlet. Place beaters into bowl.
3. Move the speed control to desired speed, starting at 1 and increasing to a higher
speed as necessary.
4. When finished mixing, move the speed control to 0 (OFF) and unplug mixer.
5. To eject beaters, with speed control set at 0 (OFF) push straight down on the
speed control.
Speed
Control
Eject
0
2
4
6
5
3
1
OFF
Power Surge (on selected models)
Press and hold down the button for additional power at any speed.
NOTE: Do not use Power Surge for more than two minutes at
a time or motor may overheat.
Hand Mixer Stabilizer
CAUTION: Never use the stabilizer when the mixer is on. Do not use the stabilizer on
small (1
1
⁄2 quart) mixing bowls or plastic mixing bowls. This fea-
ture can be used on most large mixing bowls. Use the stabilizer
while adding ingredients or checking a recipe. To use, TURN
MIXER OFF, then set the mixer on the edge of the bowl
HOW TO USE YOUR MIXER
MIXER FEATURES
Eject
Surge
0
Power
Surge
840146100 ENv00 1/12/06 10:06 AM Page 5