How to Use Memory Function
Q
The Memory Entry/Recall pad allows you to store When the pre-set cooking function is needed, touch-
complete 2, 3, or 4-step programs or any l-step
ing Memory Entry/Recall pad once again will set the
cooking function which requires the entry of time or oven automatically for the cooking function(s) you
temperature. Just set the oven and press the Memory
previously stored in memory. Touch Start and the
Entry/Recall pad instead of Start. As Memory Entry/
oven begins microwaving this pre-set program.
Recall pad is pressed, readout becomes blank, in-
dicating that oven can now be used for other
programs.
DO THIS TOUCH THIS
YOU’LL SEE THIS HAPPENING
ON THE CONTROL PANEL
Set the control panel for the way
you want the food cooked. But Before you touch Memory Entry/
don’t press START. Use a single Recall, signal lights on the readout
setting or a program as described
above the function that you set
on page 16. Defrost, cook by time
come on. Lights go off as soon as
or temperature. . . any settings but Memory Entry/Recall pad is
the automatic simmer function
touched.
work with memory.
Leave these simple instructions with the baby sitter:
DO THIS TOUCH THIS
SHE’LL SEE THIS HAPPENIN
ON THE CONTROL PANEL
a
Put the food in oven and close the
door. Insert probe if TEMP COOK
or TEMP HOLD has been selected.
Signal lights show what kind of
microwaving you selected. (No
light shows when using HOLD/
TIMER.)
The oven will cook dinner the way
All signal lights go off, except the
the children like it. Just as if
one that confirms your first in-
Mother were there.
struction. The oven carries out the
cooking program.
Change your mind? It’s easy to clear the Memory,
Use your oven while it’s remembering. Using the
Just enter a new program, and the old instructions Memory only stores instructions. You’re free to use
are automatically erased. The oven is ready to re-
the oven for any type microwaving. Only when you
member new instructions.
touch Memory Entry/Recall and START does the
Remember: If you have any cooking program set in
oven start carrying out the stored instructions.
the oven, pressing Memory Entry/Recall pad will
store that program in oven’s memory, and will erase
a
the previous memory.
.
14
—.