Filter
Top Products
31
Consumer Support
Installation
Instructions
Troubleshooting TipsOperating InstructionsSafety Instructions
Care and cleaning of the range. ge.com
Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy
to clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
CAUTION: Do not operate the
cooktop without all burner parts and grates
in place.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
Sealed Burner Assemblies
Burner
head and
cap
assembly
Center
griddle
Electrode
Electrode
Burner
cap
Burner
head
Burner
base
Front right burner
Make sure the hole in the burner
head is positioned over the electrode
and that the burner head is fully
inserted inside the burner base.
A small gap between the base and
head is normal.
Electrode
Burner cap
Stability
chamber
Burner base
Front left burner, back right burner
and back left burner
Make sure the slot in the burner
head is positioned over
the electrode.
Burner head
Use a
sewing
needle or
twist-tie to
unclog the
small hole
in the
burner
head.
The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner is turned
to LITE, all the burners spark. Do not
attempt to disassemble or clean around
any burner while another burner is on.
An electric shock may result, which
could cause you to knock over hot
cookware.
Electrode
Electrode
Burner head
Burner
base
Front right burner
Front left, back
right and back left
burner