Filter
Top Products
Burner Heads (on some models)
Place burner heads over the electrodes
on the cooktop, in the correct locations
according to their size. There is one small, one
medium, one extra large and one dual flame
extra large burner head.
Oval (Center) Burner Head/Cap Assembly
Place the oval (center) head/cap assembly
over the electrode on the cooktop.
Caps
Place the matching size caps onto the burner
bases or heads.
Make sure that the heads and caps are
replaced in the correct locations.
Grates
Place the left, right and center grates on the
cooktop. These grates are position specific.
The undersides of the left and right grates are
marked “OUTSIDE.” Place the middle grate with
its bowed front toward the front of the range.
CAUTION:Do not operate the burner
without all burner parts in place.
50
Installation of the range.
Seal the Openings
S
eal any openings in the wall behind the range
and in the floor under the range when hookups
are completed.
Assemble Surface Burners
Operating Instructions
Safety Instructions
Installation
Instructions
Troubleshooting TipsConsumer Support
Electrode
Slot
Front of range
Oval head and
cap assembly
Medium cap
Front of range
Extra large cap
Small cap
Dual flame extra
large cap
Make sure the slot in the burner
head is positioned over the
electrode.
Outside grate
Outside grate
Center grate
Burner cap
Burner
head
Burner base
Electrode
Burner cap
Burner
head
Burner
base
Electrode
Stability
chamber
Make sure the slot in the
burner head is positioned
over the electrode.
Make sure theholeintheburnerhead
assemblyispositioned overthe electrode
and thattheburner headisfully inserted inside
the burner base.A smallgapbetweenthebase
and headisnormal.
Front left, back rightand back leftburners
Front right burner
Medium head
Front of range
Extra large head
Small head
Dual flame
extra large head