Filter
Top Products
WARNING—TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring
must be done by qualified persons(s) in
accordance with all applicable codes and
standards, including fire-rated construction.
B. When cutting or drilling into wall or ceiling,
do not damage electrical wiring and other
hidden utilities.
C. Ducted fans must always be vented to the
outdoors.
WARNING—To reduce the risk of fire,
use only metal ductwork.
Important—Save for the local electrical
inspector’s use.
JN327
JV327
JV337
JV347
Installation Instructions for
General Electric Hood
Power supply connection box
on underside of hood.
Exhaust Outlet
12″
12″
5
1
⁄
2
″
5
1
⁄
2
″
12″
17
1
⁄
2
″
17
1
⁄
2
″
5
1
⁄
2
″
17
1
⁄
2
″
30″
Power supply connection box
on underside of hood.
Exhaust Outlet
30″
Exhaust Outlet Knockouts
4
Power supply connection box
on underside of hood.
30″
5
1
⁄
2
″
12″
17
1
⁄
2
″
Exhaust Outlet
Knockouts
Power supply
connection box on
underside of hood.
30″
For ducted installations,
remove the baffle and re-install
so the short side marked
“VENTED” is visible. The long
side of the baffle should be
inside the hood.