Filter
Top Products
22
Installation Instructions
IMPORTANT NOTES
When replacing the french doors:
• Read the instructions all the way through before
starting.
CAUTION
Lifting Hazard. Single person lift can cause injury.
Use assistance when handling, moving or lifting the
refrigerator doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To eliminate the risk of electric shock or injury during
installation, you must first unplug the refrigerator
before proceeding. Failure to follow these instructions
can result in electrical shock.
REINSTALLING THE FRENCH DOORS (on some models)
1
REINSTALLING CENTER HINGE BRACKETS AND
HINGES
A. Using a 5/16” socket/ratchet driver, reinstall
the bolts and center hinge brackets to the
cabinet.
B. Using a 1/4” Allen wrench, reinstall the 2
hinge pins into the hinge brackets.
2
REHANGING THE RIGHT DOOR
A. Lower the refrigerator door onto the right
hinge pin.
B. Make sure the door is aligned with the
cabinet. Attach the hinge to the top of the
cabinet loosely with bolts removed earlier.
C. Make sure the gasket on the door is flush
against the cabinet and is not folded. Tighten
the bolts to 60 lb/in.
D. Replace the right hinge cover on top of the
refrigerator using a Phillips screwdriver.
3
REHANGING THE LEFT DOOR
A. For NON Ice and Water Models Only: Pass
the wire through the slot in the hinge. Place
the hinge pin into the top of the door.
B. Lower the refrigerator door onto the left
hinge pin.