NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
Figure C
7
Freezer Compartment Temperature Control
Adjust freezer compartment temperature. The freezer
temperature is preset in the factory at 0°F. Allow
24 hours for temperature to stabilize to the preset
recommended setting.
Fresh Food Compartment Temperature Control
Adjust fresh food compartment temperature. The fresh
food temperature is preset in the factory at 37°F. Allow
24 hours for temperature to stabilize to the preset
recommended setting.
Water Filter
Press and hold 3 seconds to reset the Water Filter.
Turbo Cool
To set the TurboCool™, press the Alarm pad for 3
seconds. The display will show tc.
TurboCool™ rapidly cools the refrigerator compartment
in order to more quickly cool foods. Use TurboCool™
when adding a large amount of the food to the
refrigerator compartment, putting away foods after
they have been sitting out at room temperature, or
when putting away warm leftovers. It can also be used if
the refrigerator has been without power for an extended
period.
NOTE: The refrigerator temperature cannot be
changed during TurboCool™. The freezer temperature
is not affected during TurboCool. When opening the
refrigerator door during TurboCool™, the fans will
continue to run if they have cycled on.
Alarm
Press the Alarm pad to toggle the door alarm between
off and on. The alarm will sound if either door is left open
for more than 2 minutes. The beeping stops when you
close the door.
Lock
Press and hold the Lock pad for 3 seconds to lock out
ice and water dispenser and all other controls. Press and
hold to unlock the controls.
LED dispenser Light
Press the Light pad to turn your dispenser light on and
off.
NOTE: To put the refrigerator control in the OFF position,
simultaneously touch the words Freezer and Fridge
for 3 seconds. Power to the refrigerator cannot be
disconnected by any setting on the control panel.
GFE24, PFE24, CFE24 External Control