Filter
Top Products
HOW TO CHANGE COLOR PANELS
If
you
are
redecorating, you
can
change your dishwasher’s front panels to
match or blend with your new
colors
by flipping them over. Each side of
etich
panel is a different color. You may also paint a panel with a color of
your own choice.
How to Change the Door Panel:
1.
Take out trim screws on either side of the
dishwasher door. Remove the side trim.
2. Slide the door panel out.
(Careful—edges may be sharp.)
3. Turn the door panel around and put the color you
want in front.
4. Replace the door panel, side trim and screws.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
How to Change the Lower Panel:
Top
Trim
\
c
/@,
i
Attachment Screws
1. Remove the panel attachment screws.
2. Remove the entire access assembly by lifting it up
and over the retaining tabs.
3. Take out the top trim screws and remove the
top trim.
4. Slide the color panel(s) up and out and put the color
you want in front.
5. Replace the top trim and screws.
6. Replace the entire access assembly by hanging
it back on the retaining tabs. Hold the access
assembly in place and replace attachment screws.
Wood Panel
fiim
Kit
Wood panel trim kits, contain trim and
Order a Trim Kit from:
instructions for adding a decorative wood door
GE Appliances
panel and lower access panel no thicker than 1/4”
c/o
Dri-View
Manufacturing
to match kitchen cabinets.
4706
Allmond Ave.
Specify the trim color of your choice from the
following options:
GPF40BC
(Chrome Trim and Screws)
GPF40BK (Black Trim)
GPF40WH (White Trim)
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
12
Louisville, KY 40209