GE GSD950 Dishwasher User Manual


 
OFF
~START
Dial Cycles
The RINSE & HOLD cycle is
for
rinsing
partial loads which will be washed later.
Do
not
1{.sc
detergent.
a.
Make
sure HEATED DRY is
off.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
The
PLATE WARMER cycle (on some models)
is for warming clean dishes and serving plates for
the serving of hot foods. The cycle will take
approximately
35
minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Selection Chart
Wash Cyc]cs
POTSCRUBBER
NORMAL WASH
LIGHT WASH
WATER SAVER
RINSE
&
HOLD
Wash cycle
Wa[er
Use
Time
Gallons
Minutes
(approx.
)
(fipprox.
)
Cycle Sequence
10.6 72
mmmmmmm
9.1
51*
mmmmmm
7.9
51*
mamma
6.4
51*
mmmm
*Uncxtcodcd
titnes.
These cycle times will
be
increased approximately 2 I minutes
if
Wash
Heat
Boost
option
is selected.
Drying options:
HEATED DRY
on,
Availahle
on
all
wash
cycles
except RINSE& HOLD. Add 35 minutes
to
wash cycle time.
HEATED DRY
off.
Drying heater is turned
off.
Dishes
dry
naturally.
5
——
——-—
–.—.