Filter
Top Products
OPEWT~G
THE SELF-CLEANING OVEN
(continued)
How to Set Delay Start of Cleaning
Quick Reminder:
1.
Latch the door.
2. Press the AUTO SELF CLEAN
pad,
3. Press the INCREASE or DECREASE pad
until desired Clean Time appears.
4. Press the STOP TIME pad.
5. Press the INCREASE or DECREASE pad until
the desired Stop Time appears in the display.
Delay Start is setting the oven timer to start the clean
cycle automatically at a later time than the present
time of day.
NOTE: Before beginning, make sure the oven clock
shows the correct time of day.
1. Follow steps to prepare the oven for cleaning.
2. Slide the latch handle to the
right as far as it will go.
Never force the latch
=
handle. Forcing the handle
/<
‘
will damage the door lock
Ill\*
mechanism.
m
3. Press the AUTO SELF CLEAN pad.
u
SELF
CLEAN
4. Press the INCREASE or DECREASE pad to enter
the Clean Time.
E
STOP
TIME
5. Press the STOP TIME pad.
“STOP TIME” and the earliest
Stop Time you can set will appear
in the display.
The earliest Stop Time will be the Clean Time
selected plus the time of day. For example: If
the Clean Time is 3 hours and the time of day is
6:00,
the Stop Time that appears in the display
will be
9:00.
6. Press the INCREASE
pad
to change the Stop
7.
Time to a later time of-day if
desir=d.
For
-
example:
If you set Stop Time at 11
:00,
oven
will start clean cycle at
8:00
and end at 11
:00.
The self-clean cycle will automatically begin after
“CLEAN” is displayed and the time for clean cycle
is set. The words “ON” and “LOCK” will appear in
the display. It will not be possible to open the oven
door until the temperature drops below the lock
temperature and the LOCK light goes off.
When the LOCK
light
is off, slide the latch handle
to the left as far as
fi
will go and open the door.
24