Filter
Top Products
Safety Instructions Operating InstructionsSafety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support
Using the oven controls.
GEAppliances.com
Throughout this manual, features and appearance may vary from your model.
11
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press this pad to select the bake function.
BROIL HI/LO Pad
Press this pad to select the broil function.
Display
Shows the time of day and the time set for
the timer.
If “F—and a number or letter” flash in the display
and the oven control signals, this indicates a
function error code.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when
there has been a power outage.
COOKING TIME Pad
Press this pad and then press the + or –
pads to set the amount of time you want
your food to cook. The oven will shut off
when the cooking time has run out.
DELAY START Pad
Press this pad and the + or – pads to delay
the starting of your oven up to 9 hours and
59 minutes.
OVEN LIGHT Pad
Press this pad to turn the oven light on
or off.
TIMER/CLOCK Pad
Press this pad to select the timer feature.
Press and hold this pad, until the display
changes, to set the clock.
START Pad
Must be pressed to start any cooking or
cleaning function.
– Pad
Short taps to this pad will decrease the
time or temperature by small amounts.
Press and hold the pad to decrease the
time or temperature by larger amounts.
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts. Press
and hold the pad to increase the time or
temperature by larger amounts.
CLEAR/OFF Pad
Press this pad to cancel ALL oven
operations except the clock and timer.
SELF CLEAN Pad
Press this pad to select the self-cleaning
function. See the Using the self-cleaning
oven section.