Filter
Top Products
Operating Instructions
10
Safety InstructionsInstallation InstructionsTroubleshooting Tips
Consumer Support
Throughout this manual, features and appearance may vary from your model.
You have the choice of having the timer show the time
counting down or the time of day. In either case, the timer
will signal at the end of the timer period to alert you that
the time is up.
Using the clock and timer.
To Set the Clock
NOTE: When you first plug in the range or after
a
power failure, the entire Clock/Timer display will
light up.
Press the CLOCK pad.
Press and hold the + or – pad and the
time of day will change 10 minutes at
a time. To change the time by single
minutes, give the pads short taps.
Press the CLOCK pad to start the clock.
To Set the Kitchen Timer
Press the KITCHEN TIMER ON/OFF pad.
Use the + and – pads to set the timer.
Short taps on the + or – pad change
the timer’s setting one minute at a
time. Pressing and continuing to
hold the + pad increases the setting
10 minutes at a time.
Once you have set your timer, press
the KITCHEN TIMER ON/OFF pad to
start timing.
As the timer counts down, a signal will
indicate when one minute is left. After
this signal, the display will count down in
seconds. When time runs out, a final signal
will sound. Press the KITCHEN TIMER ON/OFF
pad to stop the signal.
To Change or Cancel the
Kitchen Timer
Setting
When the timer is counting down, use the
+ and – pad to change the remaining time,
or press the KITCHEN TIMER ON/OFF pad
to stop the timer. The timer cannot be
cancelled unless you have fully completed
“set timer” instructions above.
Display Clock While
Kitchen Timer
Is Operating
Pressing the CLOCK pad while the timer is
operating will not interfere with the timer’s
operation; the display will change to show
the clock, but the timer will continue to
count down and will still signal when time
is up. Press the KITCHEN TIMER ON/OFF pad
again to change the display back to show
the timer.