Filter
Top Products
30″ Sealed Gas Cooktop
Installation
Instructions
CAUTION: Before you begin—read these
instructions completely and carefully.
• IMPORTANT—Save these instructions for
local inspector’s use.
• IMPORTANT—OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
• Note to Installer—Be sure to leave these
instructions with the Consumer.
• Note to Consumer—Keep these instructions
for future reference.
• Note—This appliance must be properly
grounded.
• IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturer’s instructions.
• Skill level—Installation of this appliance
requires basic mechanical skills.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
PARTS INCLUDED
1/8″ Drill Bit &
Electric or
Hand Drill
Phillips
Head
Screwdriver
Pencil
Ruler or
Straightedge
Joint Sealant
Saber Saw
TOOLS YOU WILL NEED
14
Pipe Fittings
MATERIALS YOU MAY NEED
Shut Off
Valves
Pipe WrenchFlat-Blade Screwdriver
In the Commonwealth of Massachusetts:
• This product must be installed by a
licensed plumber or gas fitter.
• When using ball-type gas shut-off valves,
they shall be the T-handle type.
• A flexible gas connector, when used,
must not exceed 3 feet.
2 screws
2 Hold
Down
Brackets
Foam
Tape
If you have questions, call 1.800.GE.CARES
or
visit our Website at: ge.com