Filter
Top Products
A
r
●
●
QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
CONTROL KNOB
WILL NOT TURN
TICKING SOUND
OF SPARK IGNITER
PERSISTS AFTER
BURNER LIGHTS
TICKING
SOUND
PERSISTS AFTER
BURNER IS
TURNED OFF
BURNERS
DO NOT
LIGHT
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
POSSIBLE CAUSE
● When the knob is at the OFF position, it must be pushed in before it can be
turned, and must be turned in a counterclockwise direction. When the knob is at
any other position, it can
be turned in either direction without being pushed in.
●
Turn
burner off and relight. If ticking is still present, call for service.
●
Be sure
knob is in
the
OFF position. Remove knob by pulling it straight off
the stem and check bottom of knob for any build-up of soil.
●
Maim
sure electrical plug is plugged into a live power outlet.
*
Gas supply not connected or not turned on.
● Igniter opening in burner body may be clogged (see Burner Assembly in the
Care and Cleaning section). Remove the obstruction.
m
Burner parts
not
replaced correctly (see Care and Cleaning section).
● Counter unit not properly grounded or polarized. This can affect spark ignition.
●
Soil
clogging
holes in burner top. Remove and clean.
●
Cooktop
burner top not replaced correctly.
●
Knob
not reinstalled correctly. Push knob down on the stem.
(A)
Yellow
flames
(B)
Yellow-tipped flames
(C) Normal soft blue flames
*
If burner flames look like (A) or (B), call for service. Normal burner
flames should look like (C), burning with a soft blue flame.
If you need more help.
..call, toll free:
GE
Answer Center
m
800.626.2000
consumer information service
12
—...
-—
—.-
.—.
—.