GE JGP933 Cooktop User Manual


 
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips
Consumer Support
11
Cleaning the glass cooktop surface. (on some models) www.GEAppliances.com
Allow the cooktop to cool.
Remove the burner grates. Use a
single-edge razor blade scraper at
approximately a 45° angle against
the glass surface and scrape the
soil. It will be necessary to apply
pressure to the razor scraper in
order to remove the residue.
After scraping with the razor
scraper, spread a few drops of
CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire
burned residue area. Use the
CERAMA BRYTE
®
Cleaning Pad to
remove any remaining residue.
For additional protection,
after all residue has been
removed, polish the entire
surface with CERAMA BRYTE
®
Ceramic Cooktop Cleaner
and a paper towel.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than the
pad included with your cooktop.
Allow the cooktop to cool.
Remove the burner grates and
spread a few drops of CERAMA
BRYTE
®
Ceramic Cooktop Cleaner
on the entire burned residue area.
Using the included CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner
and a paper towel.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under “To Order
Parts” section on next page.
NOTE: Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite
®
Multi-Purpose No
Scratch blue scrub pad.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for
the first time, remove the burner
grates and clean the cooktop
with CERAMA BRYTE
®
Ceramic
Cooktop Cleaner. This helps
protect the top and makes
cleanup easier.
Daily use of CERAMA BRYTE
®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE
®
Ceramic Cooktop Cleaner
directly to the cooktop.
Use a paper towel or CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop surface.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thoroughly.
Clean your cooktop after
each spill. Use CERAMA
BRYTE
®
Ceramic Cooktop
Cleaner.