Filter
Top Products
PROBLEM POSSIBLE CAUSE
SURFACE UNITS DO • Difficulty may be in the main distribution panel of your house caused by a
NOT WORK PROPERLY blown oven circuit fuse, a tripped oven circuit breaker, the main fuse or the
main circuit breaker, depending on the nature of the power supply. If a circuit
breaker is involved, reset it. If the control box uses fuses, the oven fuse
(a cartridge-type) should be changed BUT ONLY BY SOMEONE FAMILIAR
WITH ELECTRICAL CIRCUITS. If after doing one of these procedures, the
fuse blows or circuit breaker trips again, call for service.
NOTE: Apartment tenants or condominium owners should request their building
management to perform this check before calling for service.
• Drip pans are not set securely in the cooktop.
• Surface unit controls are not properly set or wrong surface unit control is
set for unit you are using.
• Surface units are not plugged in solidly.
If you need more help…call, toll free:
GE Answer Center
®
800.626.2000
consumer information service
14
QUESTIONS?
USE THIS PROBLEM SOLVER