Filter
Top Products
Consumer Support
Operating InstructionsSafety Instructions
Installation Instructions Troubleshooting Tips
11
36
″
Cooktops/Downdraft Unit JVB67
NOTE: Before you begin: Measure and mark Dimension 3 to ensure that adequate flat countertop
surface is available.
■ Identify the cutout illustration for the cooktop
model you are installing with this downdraft vent.
■–Draw lines on the countertop to follow as a cutting
guide.
■–Make sure sides of the opening are parallel and
rear and front cuts are exactly perpendicular to sides.
Planning Installation 36” Electric & Gas Cooktops with Downdraft Vents Preparing Cutout
Cooktop Surface Surface Depth Minimum Setback Combined Cutout Combined Cutout
Model No.
Overall Width Overall Depth with Downdraft Cutout to Front Edge Width Depth
JP626 35-1/2″ 21″ 23-1/8″ 2-1/2″ 33-7/8″ 21-15/16″
JP960 36″ 20-3/8″ 22-1/2″ 2-1/2″ 33-7/8″ 22-1/8″
JP968
JP960S 36-1/8″ 21″ 23-1/8″ 2-1/2″ 33-7/8″ 22-1/16″
JP968S
JGP628 36″ 21″ 23-1/8″ 2-1/2″ 33-7/8″ 22-1/16″
JGP963
JGP636 36″ 21″ 23-1/8″ 3-1/4″ 34″ 21-15/16″
JGP962 36″ 20-7/16″ 22-9/16″ 2-1/2″ 33-7/8″ 21-13/16″
JGP962S 36-1/8″ 21-1/16″ 23-3/16″ 2-1/2″ 33-7/8″ 22-1/8″
JGP963S
2
1
⁄8″
8
1
⁄2″