Filter
Top Products
Safety InformationOperating InstructionsTroubleshooting TipsConsumer Support
36
Cooktop Light/Night Light
Replace the burned-out bulb with a 40-watt
incandescent bulb (WB36X10003), available from
your GE supplier.
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw at the outside edge of the
light cover and push on the inside edge of the
cover to open.
Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by gently turning.
Replace the screw. Connect electrical power
to the oven.
4
3
2
1
Oven Light
Replace the burned-out bulb with a 40-watt
incandescent bulb (WB36X10003), available from
your GE supplier.
To replace the oven light, first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the top grille by taking out the 2 screws
that hold it in place and sliding the grille to the
left (opening the door makes grille removal
easier).
Next, remove the screw located above the door
near the center of the oven that secures the
light housing.
Replace the grille and screws. Connect electrical
power to the oven.
4
3
2
1
Replacing the light bulbs.
Screws
Remove
screws